TAFE 241 DI
aggregates specifications
Engine  
Make/Type Simpson S325.1 Engine, 4 stroke, Direct Injection Diesel engine
Cylinders 3
Bore/Stroke 91.4/127 mm (3.6/5
Cubic Capacity 152 cubic inches (2.5) litres
Engine max Gross Power 40.55 HP (29.6 Km) @ 2000 E rpm
Air cleaner Oil Bath Type
Cooling Pressurized water cooling
Fuel Injection Pump Make MICO Inline Pump
Fuel Filter Type 40.55 HP (29.6 Km) @ 2000 E rpm
Exhausts Vertical
Clutch  
Type Single Dry friction
Tractor Driving plate 12" (305 mm)
Gear Box  
Gear Box Sliding Mesh Eagle Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gear side to give 8 forward and 2 reverse speeds
Rear Axle & Final Drive Direct Drive with Crown Wheel and Pinion
Brakes  
Type Mechanical, Dry Sealed, Disc Brakes acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes
Steering  
Type Manual, Screw and Recirculating ball nut type unit

Hydraulic System Type Mark 1A

(Optional)

 
Type Reciprocating Mark 1A fully submerged in oil
Location Centre Housing
Functions Position, Draft and 3 point linkage Cat I
Wheels and Tyres  
Front 6.00 X 16 8 ply rating
Rear 12.4 X 28 12 ply rating
Wheel Track  
Front (48*x72*) 1220-1830 mm
Rear (52*x28*) 1320 -1960 mm
(Both tracks adjustable in steps of 4", 102 mm)  
Electricals  
12 volt Negative earth system  
Battery 12 V/85AH maintenance free battery
Alternator 12V 36 A
Ignition Key operated with neutral sfatey switch
Safety Thro Neutral Safety Switch switch
Lights
  • 2 headlights
  • 2 Front Paarking -cum-side indicator lights
  • 1 work lamp
  • Hazard warning system
  • Combination Switch
Dimensions and weight  
Overall length 123.5" (2680 mm)
Overall width (mm) 65" (1650 mm)
Overall Height (mm) 57.6" (1585 mm)
Wheelbase (mm) 75" (1820 mm)
Min Ground Clearance 13. 4" (310 mm)
Turning Circle Radius  
With Brakes 130.7" (3320 mm)
without brakes 141" (3600 mm)
Total Weightwith full reservoir(Kg) 1715 kg (3773 lbs)
Capacities  
Fuel tank 47 litres
Engine Sump 6.0 litres
Transmission cum Hydraulics 28.5 litres
Radiator and cooling system 10 litres
Steering box 0.9 litres

Standard Fatures

Swept front axle, Flat top fenders, hand and foot throttle, Hand parking brake, Tool box, Spring suspension seat, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, Fuel Gaugue, Ammeter, main beam indicator, ignition ON indicator, Combination switch, Water seperator, Front weight platform with 2 wwieghts, Rear wheel weights.

 

Variable Feature

Hydraulic system, Cold Starting system aid, Chain Stablizer Kit, Swing draw bar, Automatic Hatch, 7 pin trailer socket

FABS FOR TAFE 241 DI