| TAFE 35 DI 2WD | |
| aggregates | specifications |
| Engine | |
| Make/Type | Simpson S324 Direct Injection Diesel engine |
| Cylinders | 3 |
| Bore/Stroke | 88.9/127 mm (3.5"/5") |
| Cubic Capacity | 144 cubic inches (2.365) litres |
| PTO Horsepower | 30.0 HP (22.4 Km) @ 2000 Erpm |
| Air cleaner | Oil Bath Type |
| Cooling | Pressurized water cooling |
| Fuel Injection Pump Make | MICO Inline Pump |
| Rated Engine HP | 35.0 HP (26.1 Km) @ 2000 E rpm as per BS Au 141 a |
| Starting Aid | Intake Manifold Healer |
| Clutch | |
| Type | Dual Dry friction type |
| Tractor Driving plate | 12" (305 mm) for both |
| The PTO shaft Drving plate | 10" (254 mm) |
| Gear Box | |
| Gear Box | Mechanical Sliding Mesh Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gearbox output side to give 8 forward and 2 reverse speeds |
| Power Take off | |
| Power Take-off | 1 3/8" (34.5.9 mm) dia 6 spline live without ground speed. PTO speed 604 rpm at 2000 engine rpm. Engine to PTO ratio: 3.3125:1 |
| Brakes | |
| Type | Mechanical, internally expanding brake shoes acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes |
| Steering | |
| Type | Manual |
Hydraulic System |
|
| Functions | Position, Draft and 3 point linkage Cat I |
| Electricals | |
| 12 volt Negative earth system | |
| Battery | 12 V/85AH |
| Alternator | 28 AMPs -12 V |
| Ignition | Key operated |
| Safety | Thro Neutral Safety Switch |
| Lights |
|
| Wheels and Tyres | |
| Front | 6.00 X 16 6 ply rating |
| Rear | 12.4 X 28 8 ply rating |
| Wheel Track | |
| Front | (48"x72") 1220-1830 mm |
| Rear | (52"x76") 1320 -1960 mm |
| Adjustment steps | 4" (100 mm) |
| Dimensions and weight | |
| Overall length | 118.5" (3010 mm) |
| Overall width (mm) | 65" (1650 mm) |
| Overall Height (mm) | 87.6" (2200 mm) top of vertical exhaust |
| 56.9" (1445 mm) top of Steering Wheels | |
| Wheelbase (mm) | 72.0" (1930 mm) |
| Min Ground Clearance |
|
| Total Weight without accessories | 1600 kg (3520 lbs) |
| Capacities | |
| Fuel tank | 12.7 Gal (48 litres) |
| Crank case | 6.9 qts (8.5 litres) |
| Hydraulic system | 7.56 Gal (28.5. litres) |
| Cooling system | 11.1 qts (10.5 litres) |
| Steering box | 1.6 qts (1.5 litres) |
Standard Fatures |
| Shell fenders, foot throttle, Hand parking brake, Vertical Exhaust, Tool box, Swinging Drawbar, chain stabalizer kit, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, main beam indicator, ignition ON indicator, and Blinker warning switch. |
Variable Feature |
Compressor, Oil Pipe Kit, 7 pin trailer socket, Shell fenders, ROPS, Seat Belt, Front wieght platform and weights, CAT II (interchangable ball),
FABS FOR TAFE 35 DI @WD |
HIGHLIGHTS