| TAFE 35 DI | |
| aggregates | specifications |
| Engine | |
| Make/Type | Simpson S324 Direct Injection Diesel engine |
| Cylinders | 3 |
| Bore/Stroke | 88.9/127 mm (3.5"/5") |
| Cubic Capacity | 144 cubic inches (2.365) litres |
| PTO Horsepower | 30.0 HP (22.4 Km) @ 2000 E rpm |
| Air cleaner | Oil Bath Type |
| Cooling | Pressurized water cooling |
| Fuel Injection Pump Make | MICO Inline Pump |
| Rated Engine HP | 35.0 HP (26.1 Km) @ 2000 E rpm as per BS Au 141 a |
| Starting Aid | Intake Manifold Healer |
| Clutch | |
| Type | Single Dry friction or Dual Dryfriction type |
| Tractor Driving plate | 12" (305 mm) for both |
| The PTO shaft Drving plate | 10" (254 mm) |
| Gear Box | |
| Gear Box | Mechanical Sliding Mesh Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gearbox output side to give 8 forward and 2 reverse speeds |
| Power Take off | |
| Power Take-off | 1 3/8" (34.5.9 mm) dia 6 spline live without ground speed. PTO speed 604 rpm at 2000 engine rpm. Engine to PTO ratio: 3.3125:1 |
| Brakes | |
| Type | Mechanical, internally expanding brake shoes acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes or Mechanically actuated dry disc brakes performing the same operation
|
| Steering | |
| Type | Manualor hydrostatic steering |
Hydraulic System |
|
| Functions | Position, Draft and 3 point linkage Cat I |
| Electricals | |
| 12 volt Negative earth system | |
| Battery | 12 V/85AH |
| Alternator | 28 AMPA |
| Ignition | Key operated |
| Safety | Thro Neutral Safety Switch switch |
| Lights |
|
| Wheels and Tyres | |
| Front | 6.00 X 16 6 ply rating |
| Rear | 12.4 X 28 8 ply rating |
| Wheel Track | |
| Front | (48"x72") 1220-1830 mm |
| Rear | (52"x76") 1320 -1960 mm |
| Adjustment steps | 4" (100 mm) |
| Dimensions and weight | |
| Overall length | 123.5" (2680 mm) |
| Overall width (mm) | 65" (1650 mm) |
| Overall Height (mm) | 87.6" (2200 mm) top of vertical shaft |
| 56.9" (1930 mm) top of vertical shaft | |
| Wheelbase (mm) | 76.0" (1930 mm) |
| Min Ground Clearance |
|
| Total Weight withwithout accessories | 1610 kg (3561 lbs) |
| Capacities | |
| Fuel tank | 12.7 Gal (48 litres) |
| Crank case | 6.9 qts (8.5 litres) |
| Hydraulic system | 7.4 Gal (28. litres) |
| Cooling system | 11.1 qts (10.5 litres) |
| Steering box | 1.6 qts (1.5 litres) |
Standard Fatures |
| Flat top fenders, foot throttle, Hand parking brake, Tool box, Spring suspension seat, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, main beam indicator, ignition ON indicator, and rear view mirror. |
Variable Feature |
Small fenders, Differential lock, Horizontal Exhaust, Oil Immersed brakes, ROPS, Seat Belt, rear wieghts, Oil pipe kit, Front wieght platform and weights, CAT II (interchangable ball), Cold Starting system aid, Chain Stablizer Kit, Swing draw bar, Automatic Hitch
FABS FOR TAFE 35 DI |
HIGHLIGHTS