TAFE 45 4WD | |
aggregates | specifications |
Engine | |
Make/Type | Simpson S325 Direct Injection Diesel engine |
Cylinders | 3 |
Bore/Stroke | 91.44/127 mm (3.6"/5") |
Cubic Capacity | 152 cubic inches (2.5) litres |
Air cleaner | Dry Type |
Cooling | Pressurized water cooling |
Fuel Injection Pump Make | MICO Inline Pump |
Rated Engine HP | 47.0 HP @ 2250 Erpm as per BS Au 141 a |
Starting Aid | Thermostat (optional) |
Clutch | |
Type | Dual Dry friction type |
Tractor Driving plate | 12" (305 mm) for both |
The PTO shaft Drving plate | 10" (254 mm) |
Gear Box | ||
Gear Box | Mechanical Sliding Mesh Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gearbox output side to give 8 forward and 2 reverse speeds | |
Final drive | Crown Wheel pinion with Differential |
Power Take off | |
Shaft Dia | 1 3/8" (35 mm) |
Splines | 6 |
PTO Speed | 540@ 1790 Erpm |
Front Axle | |
Type | 4WD Front Axle |
Brakes | |
Type | Multi disc wet brakes operated by pendant pedals acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes |
Steering | |
Type | Hydrostatic |
Hydraulic System |
|
Pump | MARK III, 4 Cylinder Piston Pump with suction stainer |
Pump Capacity | 16 LPM @ 540 PTO rpm |
Lifting capacity | 1450 Kg @ Lower link in Horizontal Position |
Electricals | |
Battery | 12 V/75 Ah |
Alternator | 36 AMPs -12 V |
Ignition | Key operated |
Safety | Thro Neutral Switch switch |
Lights |
|
Wheels and Tyres | |
Front | 260 X 80 R20 |
Rear | 13.6 X 26- 12 PR |
Wheel Track | |
Front | 1346 to 1448 mm |
Rear | 1320 -1930 mm |
Adjustment steps | 102 mm |
Dimensions and weight | |
Overall length | (3075 mm) Lower Link in Horizontal Position |
Overall width (mm) | (1650 mm) |
Overall Height (mm) | (2225 mm) top of vertical exhaust |
56.9" (1445 mm) top of steering wheel | |
Wheelbase (mm) | (1830 mm) |
Min Ground Clearance | (340 mm) under gearbox |
Total Weight without accessories | 2055 kg |
Capacities | |
Fuel tank | 47 litres |
Crank case | 6.5 litres |
Hydraulic system | 34 litres |
Cooling system | 10.0 litres |
Steering box | 1 litre |
Standard Fatures |
Differential Lock, Square swing up bonnet, Flat Top fenders, Vertical Exhaust, foot throttle, Hand parking brake, Tool box, Spring Suspension Seat, Swinging Drawbar, chain stabalizer kit, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, main beam indicator, Fuel gaugue, Ammeter, Indicators for High Beam, Battery charge, Turn LH/RH, 4WD engagement, Front weight frame. |
Variable Feature |
ROPS, Front Weights, Rear Wheel Weights, Suncanopy, Auxilary Hydraulics
FABS FOR TAFE 45 DI 4WD |
HIGHLIGHTS