TAFE 45 DI 2WD | |
aggregates | specifications |
Engine | |
Make/Type | Simpson S325.1 Engine, 4 stroke, Direct Injection Diesel engine |
Cylinders | 3 |
Bore/Stroke | 91.4/127 mm (3.6/5 |
Cubic Capacity | 152 cubic inches (2.5) litres |
Engine max Gross Power | 40.55 HP (29.6 Km) @ 2000 E rpm |
Air cleaner | Oil Bath Type |
Cooling | Pressurized water cooling |
Fuel Injection Pump Make | MICO Inline Pump |
Fuel Filter Type | 40.55 HP (29.6 Km) @ 2000 E rpm |
Exhausts | Vertical |
Clutch | |
Type | Single Dry friction |
Tractor Driving plate | 12" (305 mm) |
Transmission | |
Gear Box | Sliding Mesh Eagle Gearbox with constant mesh gear at the input side and a palnetary reduction gear unit at the gear side to give 8 forward and 2 reverse speeds |
Rear Axle & Final Drive | Direct Drive with Crown Wheel and Pinion with differential lock |
Power Take off | |
Type | Engine PTO |
PTO Shaft speed | 540@ 1500 Erpm |
Shaft Diameter | 34.9 mm (1 3/8") |
Number of splines | 6 |
Brakes | |
Type | Mechanical, internal expanding brake shoes acting on the rear wheels simultaneously or independently. The same braking is used to apply the parking brakes |
Steering | |
Type | Manual, Screw and Recirculating ball nut type unit |
Type | Manual, Screw and Recirculating ball nut type unit |
Hydraulic System Type Mark III |
|
Type | Reciprocating Mark III fully submerged in oil |
Location | Centre Housing |
Functions | Position, Draft and 3 point linkage Cat I |
Lift Capacity | 1450 kg at Lower Link |
Wheels and Tyres | |
Front | 6.00 X 16 8 ply rating |
Rear | 12.4 X 28 12 ply rating |
Wheel Track | |
Front | (48*x72*) 1220-1830 mm |
Rear | (52*x28*) 1320 -1960 mm |
(Both tracks adjustable in steps of 4", 102 mm) | |
Electricals | |
12 volt Negative earth system | |
Battery | 12 V/75 Ah |
Alternator | 12V 36 A |
Ignition | Key operated with neutral sfatey switch |
Safety | Thro Neutral Safety Switch switch |
Lights |
|
Dimensions and weight | |
Overall length | 123.5" (2680 mm) |
Overall width (mm) | 65" (1650 mm) |
Overall Height (mm) | 87.6" (2225 mm) |
Wheelbase (mm) | 76" (1930 mm) |
Min Ground Clearance | 13. 4" (310 mm) |
Turning Circle Radius | |
With Brakes | 130.7" (3320 mm) |
without brakes | 141" (3600 mm) |
Total Weightwith full reservoir(Kg) | 1715 kg (3773 lbs) |
Capacities | |
Fuel tank | 48 litres (10.56 Gal) |
Engine Lub Oil | 6.5 litres (1.43 Gal) |
Transmission cum Hydraulics | 34 litres (7.5 Gal) |
Cooling system | 10.5 litres (2.31 Gal) |
Steering box | 0.9 litres (0.20 Gal) |
Transmission & Hydraulics | |
Constant Mesh | |
No.of Speeds | 6 Forward & 2 Reverse Speeds |
Max Road Speeds with 12.4 × 28 |
|
Forward Speed | 26.0 |
Reverse Speed | 16.3 |
PTO (Speed of Operation) | 540 rpm@1650 erpm |
Hydraulics | |
Model & Type | Mark I |
Lifting Capacity |
1100 kgf |
3 Point Linkage & Controls | Cat I & II |
Brakes | |
Type | Mechanical intrnal expanding |
Steering | |
Type | Manual recirculating ball type |
Dimensions and weight | |
Overall Length (mm) | 3200 |
Overall width (mm) | 1600 |
Overall Height (mm) | 2240 |
Wheelbase (mm) | 1900 |
Min ground Clearence (mm) | 320 |
Turning Circle Radius (mm) | |
With brakes | 2700 |
Total Weight (Kg) | 1700 |
Capacities | |
Fuel tank | 50 litres |
Engine Sump | 6.5 litres |
Transmission cum Hydraulics | 28.5 litres |
Radiator and cooling system | 10 litres |
Air Cleaner | 0.9 litres |
Standard features |
Shell fenders, hand & foot throttle, Hand parking brake, Tool box,spring suspension seat, Hour cum rpm meter, oil pressure gaugue, coolant temperature gaugue, fuel gaugue, Ammeter, main beam indicator, ignition ON indicator |
Variable Feature |
Hyrdrostatic Steering, Dry Typre air Cleaner, Cold starting aid, Flat top fenders, Disc/oil immersed brakes, Chain stablizer kit, swinging drawbar, Rear weights, Oil Pipe Kit, 7 pin trailer socket, ROPS, Seat Belt, Front wieght platform and weights, CAT II (interchangable ball), Auxuliry Hydraulics, Dual Clutch
FABS FOR TAFE 45 DI 2WD |
HIGHLIGHTS